Nikon COOLPIX P510 Reference Manual page 9

2
rD
m
6"
The camera takes one picture for each eye to simulate a three-dimensional image
on a 3D<:ompatible %/or monitor
Rotate the mode dial to
SCENE
-> MENU button -_
3D
3D
photography
1 Framethe subject.
• The focus area that the camera focuses on can be
moved to areas other than the center of the frame. To
move the focus area, press the _) button before taking
the first picture, and then rotate the multi selector or
press A, Y, _1, or I_.
To adjust the following settings, press the _) button to
temporarily cancel focus area selection, and then
adjust each setting.
Focus mode (AF (Autofocus) or _ (macro close-up))
Exposure compensation
2 Press the shutter-release button to take the first picture.
• The focus, exposure and white balance are locked after the first shot, I _" I
and _ is displayed on the monitor.
3 Move the camera horizontally to the right ....
until the translucent guide is aligned with _ _ I
the subject.
• To cancel shooting, press the _) button.
4 Wait for the camera to automatically release the shutter.
• The camera automatically takes the second picture when it detects that the subject is
aligned with the guide.
• Shooting is canceled if the subject is not aligned with the guide within ten seconds.
_8