Nikon COOLPIX P510 Reference Manual page 94

The Setup Menu
Eye-Fi Upload
Press the MENUbutton "_ V tab (_]1 "_
3) Eye-Fi upload
Option Description
Enable Upload images created by the camera to a preselected
destination.
Disable
(default setting) Images will not be uploaded.
Notes on Eye-Fi Cards
• Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.
• Select Disable where wireless devices are prohibited.
• Refer to the instruction manual of your Eye Fi card for more information. In the event of
malfunction, contact the card manufacturer.
• The camera can be used to turn Eye Fi cards on and off, but may not support other Eye Fi
functions.
• The camera is not compatible with the endless memory function. When it is set on a computer,
disable the function. If the endless memory function is enabled, the number of pictures taken may
not be displayed correctly.
• Eye Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless
devices.
• Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.
[] Eye-Fi Communication Indicator
The communication status of the Eye Fi card in the camera can be confirmed on the monitor ([_8),
• _: Eye-Fi upload is set to Disable.
• I_ (lights): Eye Fi upload enabled;waiting to begin upload.
• _ (flashes): Eye Fi upload enabled; uploading data.
• _: An error occurred. The camera cannot control the Eye Fi card.
[] Supported Eye-FiCards
As of November 2011, the _llowing Eye Fi cards can be used, Be sure that Eye Fi card firmware has
been updated to the latest version,
• Eye Fi Connect X2 SDHC 4GB
• Eye Fi Mobile X2 SDHC 8GB
• Eye Fi ProX2 SDHC 8GB
_93
S"
R
te
5"