Using The Menu Screen - Panasonic Digital Palmcoder Multicam PV-DC152-K Operating Instructions Manual

i PL^V_CK FUNCTIONS
DiGiTAL EFFECT
i CARD SETUP
d AECOROING SETUP
_onsPLAy SETUP
OTHE_ _UNCT_ONS
O
C_RD EOnT_N_
Using the Menu Screen
To facilitate the selection of a desired function or setting, this Palmcorder
displays various function settings on menus.
1 Press the [MENU] Button.
• The Menu corresponding to the Mode selected by using the [OFF/ON/
MODE] Switch O is displayed.
eWhen the [CAMERA] Lamp is on, the Camera Function Menu is
displayed. O
• When the [VCR] Lamp is on, the VCR Function Menu is displayed, i_
• When the [CARD P.B.] Lamp is on, the Card Function Menu is
displayed. _]) (PV-DC252JPV-DC252-K)
2 Rotate the [PUSH] Dial to select a desired Sub-Menu.
• Rotate the [PUSH] dial to display the items highlighted.
3 Press the [PUSH] Dial to display the selected Sub-Menu.
4 Rotate the [PUSH] Dial to select the item to be set.
5 Press the [PUSH] Dial to set the selected item to a desired
Mode.
oEach press of the [PUSH] Dial, the cursor [1_] brings up a subsequent
Mode. Menu items that cannot be used in combination with the selected
menu are displayed in dark blue.
• While a Menu is displayed, you cannot begin to record or play back. Menus
can be displayed during playback but not during recording.
• The above operations can be carried out using the Remote Controller.
(_ 10)
• To display the Menu, press the [MENU] Button O on the Remote
Controller.
• To select items on the Menu, press the [ITEM] Button O on the
Remote Controller.
• To set the mode for the selected items, press the [SET] Button O
on the Remote Controller.
To Exit the Menu Screen
Press the [MENU] Buttonagain.
About the Menu Mode Setting
The setting selected on the Menu will be retained even when the Palmcorder
is turned off. However, if the Battery or AC Adaptor is disconnected before
Turning the Palmcorder off, the selected setting may not be retained.
(But, the setup of [EFFECT2] (-_ 27) is not retained.)
eMenu operation flow is shown in this text by >>.
• File Selection in the Card Playback Mode
(PV-DC252/PV-DC252-K)
A FileSelection Operationmay be necessary during Menu Operations. In this
case, carry outthe following procedure.
I Turn the [PUSH] Dial and select a file.
• The selected file is marked by a frame _).
Press the [PUSH] Dial to confirm the selection of the file.
• Afterthe above File SelectionProcedure,carryout thevariousMenu
Operations, ( The above procedurewillnot be repeatedin the following
instructions.)
}5