Slide Show - Panasonic Digital Palmcoder Multicam PV-DC152-K Operating Instructions Manual

PV-DC252/PV-DC252-K
r
I //_ 1, 2, 3,1
1, 5, 7-_-Q_ 4,5,7
/
1,3 _
I_.__
O
Q 0
Slide Show
The recorded still pictures in the Card can be played back like a Slide Show.
You can set up a Slide Show or change the content.
To Select Pictures to Play Back in Slide Show
1 Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
• Slide Show editing screen appears.
2 Set [EDIT] >> [YES].
3 Rotate the [PUSH] Dial to select a picture and then press the
dial.
4 Rotate the [PUSH] Dial to select playback order and then
press the dial.
eThis step is skipped whenthere are no pictures set for the Slide Show,
5 Rotate the [PUSH] Dial to adjust the playback time and then
press the dial.
• The PlaybackOrder indication 0 andthe PlaybackTime (Second)
indication O appear.
• The [S] indication i_) is displayed below pictures that have been
selected for the Slide Show.
• To select the next picture, repeat Steps 3 to 5 above.
6 Press the [MENU] Button to end the setup.
7 After setting [SLIDE SHOW] >> [PRESET], press the [MENU]
Button.
8 Press the [1_] Button.
• The [M,SLIDEE>] Indication is displayed._)
To Play Back All the Pictures Continuously
After setting the [SLIDE SHOW] to [ALL], press the [b-] Button.
• The [SLIDED] Indication is displayed.
• All pictures are played back for approximately 5 seconds each, from the first
to the last recorded picture, and playback then stops.
To Pause the Slide Show
Press the [I I] Button.
• The [(M.) SLIDEI l] Indication is displayed. (_
To Stop the Slide Show
Pressthe [ffi]Button.
To Verify the Selected Pictures
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]
>> [VERIFY] >> [YES].
• Only the selected pictures are displayed in Multi*Picture Mode in the
Playback order.
To Delete the Selected Pictures
11 Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
2 Set [DELETE] >> [YES].
3 Select the picture you want to delete and press the [PUSH]
Dial.
To Reset the Slide Show Setup
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES)
>> [RESET] >> [YES] >> [YES].
• Slide Show settings are reset.
• For other notes, see page 59.
38