Panasonic palmcorder pv-d486: user guide (48 pages)
Summary of Contents for Panasonic Digital Palmcoder Multicam PV-DC152-K
Page 2
Panasonic Responsible party: Matsushita Electric Corporation of America Address: One Panasonic Way, Secaucus, New Jersey 07094 Telephone number: 1-800-211-PANA (7262) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 3
Important Safeguards 11) Grounding or Polarization--This video unit may be equipped with either a polarized 2-wire AC (Alternating Current) line plug (a plug having one blade wider than the other) or 3-wire grounding type plug, a plug having a Read Instructions--All the safety and operating third (grounding) pin.
Page 4
Precau ons Important Safeguards USE & LOCATION • TO AVOID SHOCK HAZARD ... Your Palmcorder and 17) Objects and Liquids -- Never push objects of any kind power supply should not be exposed to rain or moisture. into this video unit through openings as they may touch Do not connect the power supply or operate your dangerous voltage points or short out parts that could Palmcorder if it gets wet.
Contents Before Using Special Features Before Using ................ Using a Memory Card ............Standard Accessories ............Recording on the Memory Card ......... Quick Guide ................. Playing Back Files from the Memory Card ......36 To View the Playback Picture ..........Copying Pictures from a Memory Card to a Cassette ..
Quick Guide Charge the Battery. (_ 12) • Connect the AC Cable to the AC Adaptor and plug it into the AC Wall =Attach the Battery to the AC Adaptor. (This witf start the charging process.) Outlet. • The [POWER] Lamp and [CHARGE] Lamp lights up, and charging starts.
Controls and Components LCD Monitor (_ 14) • Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD Monitor screen. However, this is not a malfunction and does not affect the recorded picture. LCD Monitor Open Tab [OPEN V] (_ 14, 62) Accessory Shoe...
Remote Controller Using the wireless remote controller that is supplied with the Palmcorder, most of the Palmcorder functions can be operated from a distance. 2)-- Remote Controller Buttons 3)-- 1) Date and Time Button (DATE/TIME] (-) 55) Indication Output Button [OSD] (_ 33) 4)-- Counter Reset Button [RESET] (-) 63) 5)--...
Page 11
• Inserting the Button-type Battery Before using the remote controller, insert the supplied button-type battery. While pressing the Stopper pull out the Battery Holder. Insert the button-type battery with the imprint (+) facing upward. insert the Battery Holder into the Remote Controller.
Power Supply musing the AC Adaptor Insert the battery-shaped connector of the DC Cable into the Battery Holder on the Palmcorder. Connect the DC Cable to the [DC OUT] Jack on the AC Adaptor. Connect the AC Adaptor and AC Cable, •...
Lens Cap and Grip Belt ==Attach the Lens Cap TO protect the Lens surface, attach the Lens Cap. Pass the end of the Lens Cap String through the Lens Cap String holder. Pass the other end of the String through the loop made ..p_ the String...
Turning on/off the Palmcorder Selecting Modes Turn on the power first and then select Modes. IIHow to Turn on the Power Set the [OFF/ONJMODE] Switch to [ON] while pressing the center Button _). eThe [CAMERA]Lamplightsup. mHow tO Switch Modes Rotatethe [OFFION/MODE] Switch.
Using the Menu Screen To facilitate the selection of a desired function or setting, this Palmcorder displays various function settings on menus. Press the [MENU] Button. • The Menu corresponding to the Mode selected by using the [OFF/ON/ MODE] Switch O is displayed. eWhen the [CAMERA] Lamp is on, the Camera Function Menu is displayed.
List of Menus The illustrations of the Menus are for explanation purposes only, and they are different from the actual Menus. rJ_lm:S ..PROG _OFF Camera Mode Main-Menu [CAMERA FUNCTIONS] [CAMERA SETUP] Sub-Menu 1) Auto Exposure Mode [PROG.AE] (_ 24) ProgressivePhotoShotMode[PROGRESSIVE](-)21) Digital Effect Image Stabilizer [EIS] (_.
Page 18
Card Playback Mode Main-Menu [CARD FUNCTIONS] (PV-DC252/PV-DC252-K) [DELETE CARD FILE] Sub-Menu 1) Selecting and deleting a File [DELETE FILE BY SELECTION] (,,_ 40) Deleting All Files [DELETE ALL FILES] (_ 40) Selecting and Deleting a Title [DELETE TITLE BY SELECTION] (-_ 40) 2)- ,_ [CARD...
Setting Date and Time Press the [MENU] Button and rotate the [PUSH] Dial to select [OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES]. MO_N ;200g : JAN Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/ HOUR MiNUTE_46 [DAY]/[HOUR]/[MINUTE] and set it to a desired value.
CAMERA Mode Recording Set the [OFF/ON/MODE] Switch to [ON]. • The [CAMERA] Lamp lights up. O Slide the [TAPE/CARD] Selector towards [TAPE]. (PV-DC252/PV-DC252-K) Press the Recording StartJStop Button. • Recording starts. • After the [RECORD] indicator is displayed, it changes to [REC]. •...
PhotoShot Recording on the DV Cassette With this function, you can record still pictures with sound for approximately 7 seconds each on the Cassette, Slide the [TAPE/CARD] Selector to [TAPE], (PV-DC252/PV-DC252-K) Press the [PHOTO SHOT] Button in the Recording Pause Mode.
Digital Zoom Function This function is useful when you went to record close-up shots of subjects located beyond a normel zoom range of 1X to 10x magnification. With the Digital Zoom Function, you can select a magnification of 25x or 70OX. •...
Cinema Function This function is for recording in a cinema-like wide screen. Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [CINEMA] >> [ON]. • Black bars appear at the top and bottom of the screen. O To Cancel the Cinema Mode Set [CAMERAFUNCTIONS] >>...
Quick Start When this feature is activated, you can resume recording quickly even if the Palmcorder goes into standby mode (when left in Pause mode for 5 minutes). Palmcorder will be ready for shooting in approximately 1.5 seconds when the Power switch is turned [OFF] and back to tON] again.
Manual Shutter Speed Adjustment Usefut for Recording fast-moving subjects. Set the Mode Selector Switch to [MANUAL]. • The [MNL] Indication 10) appears. Press the [PUSH] Dial repeatedly until the shutter speed Indication appears. Rotate the [PUSH] Dial to adjust the shutter speed.
Recording in Natural Colors (willieBalance) Depending on the scene or light conditions, the Automatic White Balance Adjustment Mode may not be able to bring out natural colors. In such a case, the white balance can be adjusted manually. Set the Mode Selector Switch to [MANUAL].
Digital Effect Functions This Palmcorder is equipped with digital effect functions that add special 1) MULTI 2) P-IN-P effects to the scene. Digital Effects 1 [EFFECT1] [MULTI l Multi-Picture Mode [P-IN-P] Picture-imPicture Mode [WIPE] Wipe Mode 31 WIPE 41 MIX [MIX] Mix Mode [STROBE] Strobe Mode •...
Page 28
II Multi-Picture Mode Strobe Multi-Picture Mode I_: You can capture and record 9 consecutive small still pictures. Manual Multi-Picture Mode _: You can manually capture and record 9 small still pictures. After setting [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] >> [MULTI] ..Set [MULTI-PICTURES] >>...
VCR Mode Playing Back The recorded scene can be played back immediately after recording. Rotate the {OFF/ON/MODE} Switch and set the Palmcorder the VCR Mode. • The [VCR] Lamp lights up. O Press the [44] Button to rewind the tape. •...
Slow Motion Playback This Palmcorder can play back at a slow speed. Pressthe [1_] Button. Press the [-,I] Button or the [I, _] Button on the Remote Controller. eWhen the [41] Button is pressed, Slow Motion Playback proceeds in the reverse direction, while pressing the [IJ*] Button starts Slow Motion Playback in the forward direction.
Index Search Functions TO facilitate searching of desired scene, this Palmcorder automatically records index signals during recording, as explained in the following. PhotoShot Index Signal These signals are automatically recorded whenever still pictures are taken in PhotoShot Mode (-) 21). When recording still pictures using the Continuous PhotoShot Mode (4 21), the index signal is not recorded.
Playback Zoom Function A part of the image can be enlarged up to 10 times during playback. During playback, press the [P.B. ZOOM] Button on the Remote Controller. *The center of the image is enlarged to approximately doubre the size. Changing the Zoom Magnification...
Playing Back on Your TV By connecting your Palmcorder to your TV, the recorded scenes can be viewed on your TV screen. • Before connecting them, turn off the power of both the Palmcorder and TV. Connect the [AJV OUT] Jack of the Palmcorder to the Video and Audio...
PV-DC252/PV-DC252-K Special Features The PV-DC252 and PV-DC252-K models come with card functions, Using a Memory Card A Card can be used to record files or play back files. • Use a genuine SD Memory Card or MultiMediaCard only. ilnserting a Memory Card Beforeinsertinga MemoryCard, be sureto turn offthe Palmcorder.
Page 35
PV-DC252ZP_V-DC252-K nCard PhotoShot (continued) Recording from a Cassette (VCR Mode) Set the [TAPE/CARD] Selector to [CARD]. Set [VCR FUNCTIONS] >> [CARD SETUP] >> [PICTURE QUALITY] >> a desired picture quality. Start playback and press the [PHOTO SHOT] Button at the scene you want to record.
PV-DC252/PV-DC252-K Playing Back Files from the Memory Card It allows you to play back files recorded on a Card. • Playing back Still Pictures Set the Palmcorder to Card Playback Mode. eThe [CARD P.B.] Lamp lights up, eThe still picture that was recorded last on the Card is displayed. Start Playback.
pV-DC252/P_y-DC252-K Copying pictures from aMemoryCardtoa Casset_ After setting the Palmcorder to the Card Playback Mode (-_ 36) ..To Copy One Picture Set the [TAPE/CARD] Selector to [TAPE], Display a desired picture on a Memory Card. • Please referto "To select a DesiredFile and Playit Sack". Press the [PHOTO SHOT] Button, •...
PV-DC252/PV-DC252-K Slide Show The recorded still pictures in the Card can be played back like a Slide Show. You can set up a Slide Show or change the content. 1, 2, 3,1 1, 5, 7-_-Q_ 4,5,7 To Select Pictures to Play Back in Slide Show Set [CARD FUNCTIONS] >>...
PV-DC252/PV-DC252-K Creating a Title You can create a title and record on a Memory Card. Camera Mode: In PV-DC252 or PV-DC252-K, slide the [TAPE/CARD] Selector to [CARD]. eThe ]PICTURE] indication appears. Set the Lens to the image you want to use for creating a title.
PV-DC252/PV-DC252_K ..Protecting the Files on a Memory Card from Accidental Erasure (FileLock) Precious files recorded on a Memory Card can be locked to prevent accidental erasure. (Even if files are locked, the files will be deleted when the Memory Card is formatted.) After setting the Palmcorder to the Card Playback Mode (4 36) ..
PV-DC252!P_ V-DC252-K Formatting a Memory Card If a Memory Card becomes unreadable by the Pa_meorder, formatting it may make it reusable. Formatting will detete all the data recorded on a Memory Card. • 2" After setting the Palmcorder to Card Playback Mode (-_ 36) ..Set [CARD FUNCTIONS] >>...
Copying your DV Cassette to an S-VHS or VHS Cassette (Dubbing) After connecting the Pafmcorder and the S-Video, Video and Audio 2, 4, 5 Input Jacks (_ of the VCR as illustrated on the left, start the following ==T-_ procedure. •...
Using your Palmcorder with Digital Video Equipment (Dubbing) By connecting this Palmcorder with other digital video equipment (such as ® another Palmcorder of the same fOrmaVmodel) that has a DV inpuVoutput terminal (LLINK) using a 4-pin to 4-pin DV Interface cable PV-DOC9 (optional) _]_, high quality image and sounds can be dubbed in the digital mode.
.._PV:DC252/P_ V-DC252-K Using the Software with a Computer An image stored on the OV Cassette can be transferred to 'Jour Parsona_ Computer. • For models PV-DC152 and PV-DC152-K, PhotoShot transfer from the DV Cassette can be accompllahed using the PhotoVu Link software and RS-232C cable kit (optional).
PV-DC252/PV-DC252-K ArcSoft Software There are 4 types of image editing software in the ArcSoft Software package. Before you begin,.. Open [Start] >> [Programs] >> [ArcSoft] >> [Panorama Maker 3.0] or [Photolmpression 3.0] or [PhotoBase 3.0] or [PhotoPrinter 2000 Pro]. Panorama Maker 3.0 (Windows, Mac) eEasy-to-use photo-stitching program seamlessly combines multiple photos into a single panoramic picture.
PV-DC252/PV-DC252-K " ..-- ..Using the Supplied USB Connection (PV-DC252/PV-DC252-K) mOperating environment USB Driver can be installed in a PC/AT compatible personal computer which can run Microsoft Windows® XP, Windows®Me, Windows®g8SE, Windows®20O0 Professional • USB Driver VFAO366 For Windows ® •...
[Panasonic DVC USB Driver] and click [Stop]. 3 Verify [Panasonic DVC USB Driver] is selected and click [OK]. Click [OK]. • You can safelydisconnect t he cable, • Some OS, such as Windows® 98 SE, may not show the icon indicating that you may safely disconnect in task tray.
Select [Start] >> [Settings] >> [Control Panel], double click [System] select device driver tab, verify [Panasonic DVC USB Driver] and [Panasonic DVC Port Driver] are displayed in [Universal Serial Bus controllers] of [Device Manager]. • If [DVC] is displayedin [Other devices] of [Device Manager] tab, we recommend updating the driver by following the steps below: •...
Page 49
_J 0_ dr_es [System] Hardware tab, Device Manager. Verify o=_dava_x_s [Panasonic DVC USB Driver] and [USB Root Hub] in [Universal Serial Bus Controllers] of [Device Manager] of [Hardware]. • If [USB Mass Storage Device] is shown in [Universal Serial Bus controllers] of [Device Manager] tab, we recommend updating the driver as described below to Panasonic DVC USB Driver.
Page 50
Select [Start] >> [Settings] >> [Control Panel], double click ..: .._ 1, -_.F [System], Device Manager tab and verify [Panasonic DVC USB Driver] is displayed in [Universal Serial Bus controllers] of [Device Manager]. • If [USB Mass Storage Device] is displayed in [Universal Serial Bus controllers} of (Device Manager] tab, we recommend updating the driver by following the steps below.
Select the application software you want to remove. _4_be Ffm_t_,e_ _, 0 • Uninsta|ling ArcSoft Software Select [ArcSoft Software]. • Uninstalling USB driver 1 Select [USB Driver for Panasonic DVC]. Uninstalling steps may vary depending on the OS. Please refer to the user manual of your OS.
iAbout the folder structure when using the Notes (PV-DC252/PV-DC252-K) Memory Card in a personal computer oWhen a Card with data recorded on it is inserted into a • DO net disconnect USe Connection Cable while the operation light of Palmcorder is on. It may freeze the personal computer, folders will be displayed as in the figure.
1)-- l 0:00.00 "_SP --8) - R0:45 INDEX 5 × wr_lr_lT • 2)-- -D.ZOOM 3)-- -P-IN-P 4) --( -NEGA 0) m I I I -- VOLUME C-_n 5:30:45PM lo)-_ OCT 1 2002 Index Others oFor several seconds while index signals are being recorded, the [INDEX] indication flashes.
Page 55
AV INPUT RECORDING: iChanging the Counter Display Mode By changing [C.DLSPLAY] on the [DISPLAY SETUP] When you are attempting to record Sub-Menu, you can change the Counter Display Mode to on the Memory Card during dubbing (-,_ 43) on the Cassette. Tape Counter Indication (0:00.00), Memory Counter NO CARD: There is no Memory Card inserted.
Notes & Precautions • Progressive PhotoShot Function (_ 21) =When you change to the still picture Mode, you will hear a click. This is the sound of the iris closing and not an mPower-Related Items (-* 12) indication of malfunction. •...
Page 57
IEFade mManual Shutter Speed Adjustment In/Out Mode (4 22) (.-) 25) Fading-in and fading-out cannot be used when recording still • You may see vertical lines of light in the playback image of pictures in the PhotoShot Mode, Digital Still picture Mode, a brightly shining subject or highly reflective subject.
Page 58
iDigital Effect Functions (Camera Mode) • Playback Digital Effect Functions (..* 32) • Revised signals of images to which digital effects are (4 27) added during playback cannot be output from the DV elf you set [EFFECTt] on [DIGITAL EFFECT] Sub-Menu to Terminal or Digital Still Picture Terminal.
Page 59
iCard iTitle PhotoShot (_ 34) Functions (4 39) (PV-DC252/PV-DC252-K) (PV-DC252/PV-DC252-K) • The sound cannot be recorded. • Even if the contrast of the Title is adjusted, the portions • The Shutter Effect cannot be used. where there is little difference between light and dark and •...
Cautions for Use Do not spray insecticides or volatile chemicals onto the Palmcorder. • If the Palmcorder is sprayed with such chemicals, the ==After Palmcorder body may deform and the surface finish may Take out the Cassette. (.-) 13) peel off. Set the [OFF/ON/MODEl Switch to [OFF].
Page 61
• The number of hours you should wait depends on the Please consult a distributor or Panasonic Servicenter. amount of condensation and ambient temperature. • Video head cleaners can be purchased from service...
Page 62
• Cautions for Storage • LCD Monitor/Viewfinder/Lens Hood LCD Monitor Before storing the Palmcorder, take the Cassette out and detach the Battery. • In a place with drastic temperature changes, condensation Stere all the compcnents in a dry place with a relatively may take place on the LCD Monitor.
Explanation of Terms Auto White Balance Adjustment This Palmcorder steres settings that are optimal for several • Digital Video System kinds ef general light sources. The Palmcorder determines [n a digital video system, images and sounds are converted the hue of light that it receives through the lens and White into digital signals and recorded on a tape, This complete Balance Sensor, thereby judging the recording condition, digital recording is capable of recording and playback with...
Specifications Card Memory Functions (PV-DC252/PV-DC252-K) Recording Media: SD Memory Card, MultiMediaCard Image Compression: JPEG Information for your safety Digital Palmcorder Maximum Number of pictures that can be recorded on the Power Source: DC 7.8/7.2 V supplied SD Memory Card Power Consumption: Recording FINE: approx.
Palmcorder Accessory System PV-DACl 1A (For USA) /" AC Adaptor with AC Cable PV-DAC11A-K (For Canada)__ and DC Cable *CGR-D08A/1B 800mAH/Rechargeable (Replaces *CGR-D120A/1B) Lithium Ion Battery Pack *CGR-D16A/1B (Replaces 1600mAH/Rechargeable *CGR-D220A/1B) Lithium Ion Battery Pack *CGP-D28A/1B 2800mAH/Rechargeable Lithium Ion Battery Pack *CGR-D53A/1K ____ 5300mAH/Rechargeable...
CALL PANASONIC'S ACCESSORY ORDER LINE AT 1-800-332-5368 [6 AM-5 PM M-F, 6 AM-10:30 AM SAT, PACIFIC TIME] MAIL THIS ORDER TO: PANASONIC SERVICES COMPANY ACCESSORY ORDER OFFICE 20421 84th Avenue South Kent, WA. 98032 In CANADA, please contact your local Dealer for more information on Accessories.
Before Requesting Service (Problems and Solutions) If you are experiencing one of the following problems with your Digital Palmcorder, it may be something you can correct yourself. Check the list below for symptoms and corrections. Problems Solutions The Palmcorder power cannot be turned on, Is the power source connected correctly? The Palmcorder power tumed...
Page 68
Cassette or personal computer. (-_ 37, 46) Even if a Card is formatted, it cannot be used. There is a possibility of damage to either the Palmcorder or (PV-DC252/PV-DC252-K) the Card. Please contact Panasonic Call Center.
Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 1705 N. Randall Road Elgin, IL. 60123-7847 Attn: Camcorder Repair Please write the displayed above Self Diagnostic number J"...
Carry-in, Mail-in or In-Home Service For Carry-In, Mail-In or In-HomeService (as applicable) in the United States call toll tree contact number listed above or visit Panasonic Web Site: hap://www.panasonic.com For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910.
PRODUCT - LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase. Camcorder Product - One (1) year, parts and labour...
Need help?
Do you have a question about the Digital Palmcoder Multicam PV-DC152-K and is the answer not in the manual?
Questions and answers