Quick Guide; To View The Playback Picture - Panasonic Digital Palmcoder Multicam PV-DC152-K Operating Instructions Manual

4
Quick Guide
Charge the Battery. (_ 12)
• Connect the AC Cable to the AC Adaptor and plug it into the AC Wall i
Outlet.
=Attach the Battery to the AC Adaptor. (This witf start the charging
process.)
• The [POWER] Lamp and [CHARGE] Lamp lights up, and charging
starts.
=When the [CHARGE] Lamp goes off, charging is completed.
• Since the Battery will not be charged when the DC Cable is connected
to the AC Adaptor, disconnect it.
2 Attach the Charged Battery to the Palmcordar. (_ 12)
Insert the Cassette. (_ 13)
• Slide the [OPEN/EJ ECT] _) Lever toward the front and pull down to
open the Cassette Compartment.
• Insert the Cassette.
==Press the [PUSH CLOSE] _ to load the Cassette.
• Close the outside compartment Cover.
4
Start r_cording. (_ 20)
• Turn the Palmcotder on. (_ 14)
==Rotate the Switch O to [ON]. (The [CAMERA] Lamp lights up.)
• Press the O Button. (Recording starts.)
• Press the _) Button again to pause the recording.
To View the Playback Picture
5
Switch to the VCR Mode, rewind the tape, and play the tape
back. (_ 29)
• Set the _ Switch to VCR mode, (The [VCR] Lamp lights up.)
• Press the Q Button, [Rewind the tape.)
• Press the _ Button. (Playback starts.)
• Press the O Button. (Playback elope.)
6 Turn the Palmcorder off. (4 14)
• Set the _ Switchto [OFF].
7