Using Your Palmcorder With Digital Video Equipment; Dubbing) - Panasonic Digital Palmcoder Multicam PV-DC152-K Operating Instructions Manual

4
®
®
O-CDO
Using your Palmcorder with Digital Video
Equipment (Dubbing)
By connecting this Palmcorder with other digital video equipment (such as
another Palmcorder of the same fOrmaVmodel) that has a DV inpuVoutput
terminal (LLINK) using a 4-pin to 4-pin DV Interface cable PV-DOC9
(optional) _]_, high quality image and sounds can be dubbed in the digital
mode.
[Playback Unit ®]
1 Insert the recorded Cassette and set the Palmcorder to the
VCR Mode.
[Recording Unit ®]
2 Insert a Cassette to be used for dubbing and set the
Palmcorder to the VCR mode.
[Playback Unit ®]
3 Press the [1_] Button to start playback.
[Recording Unit ®]
4 While pressing the [REC] Button, press the [PLAY] Button.
(Both Buttons are located on the Remote Controller.)
• Recording starts,
Stopping Dubbing
Press the IN] Button on the recording unit first, and then press the (m] Button
on the playback unit to stop dubbing.
CAUTION:
Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright infringement,
eFor other notes, see page 59.
. L
43