Unit Indications; Front-Panel Lcd Home Screen; Figure 2-3: I6420 Home Screen - Wegener iPump 6420 User Manual

2.5.

Unit Indications

This section discusses what the user can see and learn from the iPump 6420 front-panel
LCD screen and LED indicators.
2.5.1.
What you are expecting: The RF setup parameters that you programmed, and valid signal
quality indications. After the unit is entered into the uplink control system Compel database, the
name will show as assigned in Compel.
I 6
r r
Unit name: Assigned at
factory, and then re-
assigned in Compel
database
www.wegener.com

Front-panel LCD Home Screen

Figure 2-3: i6420 Home Screen

i6420 LCD: Home screen during normal operation
4 2 0 _ n a m
r r r r r r r
RF Setup: "Marquee" of
the following items:
- Transport Data-rate
- Downlink RF frequency
- FEC ratio
Alternately, if ASI-Input
option is installed:
"ASI-input"
800070-01 Rev B
iPump 6420 User's Manual
e S N : 2 8
r q q q q q q
Signal Quality: "Marquee" of
the following items:
- Estimated link Eb/No
- Estimated RF signal level
Alternately, if no carrier lock:
"-No Sig-"
If ASI-Input option installed,
this field currently unused.
4 4 0 0
q q q q
Unit Serial Number
Chapter 2, Page 35