The Date And Time - Sony Handycam DCR-DVD101E Operating Instructions Manual

Step 4 Setting the date and time
Set the date and time when you use your camcorder for the first time. Set the
geographical area, then daylight sax ings time ([DST]), the year, the month, the day the
hour and the minute, in that order. If you do not set the date and time, the [CLOCK
SET] display appears whenex er you turn on your camcorder or change the mode dial.
If you do not use your carncorder for about 3 months, the date and time settings may
be cleared from memory because the built-in rechargeable battery in your camcorder _,3t "
will have been discharged during that time. In that case, charge the built-in ,._
rechargeable battery by connecting tire AC adaptor, and set the date and time again
(page 16, 134).
SETUP button
1
Open the LCD screen.
2
Turn the power on by pressing the POWER button for a few seconds.
The CLOCK SET display appears.
¢O¢K SET
[ Usbon_ondor
+
DST OeF
DATE Y M D
/ENTER]NEXT_TEM
3
Use the multi-selector to select the desired geographical area.
Multi-selector
Select with V/A/I_/_I and press the button in
the center to confirm your selection.
23