Sony Handycam DCR-DVD101E Operating Instructions Manual page 116

Changing the SETUP display
Icon/Item Option Meaning Mode dial
OTHERS
DATA CODE • DATE/CAM To change the display in the order of the date [] Play/Edit
(operation on
and time --* the camera data --* tile display each
the Remote time presshlg DATA CODE (page 59).
Commander) DATE Press DATA (._()DE on the Remote Commander
to display date and time during playback.
To set your local area.
AREA SET
DST SET • OFF
ON
To cancel tile use of daylight savings time.
To use tile daylight savings time.
Movie
Still
[] Play/Edit
H Movie
Still
[] Play/Edit
BEEP
• MELODY
NORMAL
OFF
COMMANDER• ON
OFF
DISPLAY • LCD
V-OUT/LCD
REC LAMP • ON
OFF
To output a melody when you start/stop H Movie
recording or when an unusual condition occurs _ Still
[] Play/Edit
on your camcorder.
To output the beep instead of the melody.
To cancel the melody, beep sound and shutter
sotlnd.
To activate the Remote Commander supplied H Movie
with your camcorder. _ Still
[] Play/Edit
To deactivate the Remote Commander to avoid
erroneous remote control operation caused by
other equipments' remote control.
To show the display on the LCD screen and in H Movie
the viewfinder. O Still
[] Play/Edit
To show the display also on the TV screen.
To light up the camera recording lamp on the It_ Still
front of your camcorder during recording. H Movie
To turn the camera recording lamp off so that
the subject is not aware of the recording.
116