Changing The Setup Display - Sony Handycam DCR-DVD101E Operating Instructions Manual

Changing the SETUP display
Menu items differ depending on the position of the mode dial. The display shows only the items
that are currently in effect or that you can operate at tire moment.
• is tire default setting.
Icon/Item Option Meaning Mode dial
MANUAL SET
PROGRAM AE -- To suit your specific- shooting requirement H Movie
(page 51). _ Still
P EFFECT
To add special effects like those in films or H Movie
on TV to images (page 54).
D EFFECT To add special effects using the various _ Movie
digital functions (page 54).
FLASH MODE* 1 • ON To fire the flash (optional), regardless of O Still
the brightness of the surroundings.
ON 0"3 To fire the flash (optional), regardless of
the brightness of the surroundings. Pre-
flashes before recording to reduce the red- ...................................
eye phenomenon.
AUTO To fire the flash (optional) automatically. _=
AUTO o*3 To fire the flash (optional) automatically. 3
Pre-flashes before recording to reduce the --.i
red-eye phenomenon.
HIGH To make the flash (optional) level higher _ Still =o
than normal setting.
• NORMAL Normal setting.
LOW To make the flash (optional) level lower _-
than normal setting.
To adjust the white balance (page 50).
FLASH LVL*I*2
WHT BAL -- H Movie
¢_ Still
AUTO SHTR • ON To automatically activate the electronic H Movie
shutter .4 when shooting in bright
conditions.
OFF
To not automatically activate the electronic
shutter .4 in bright conditions.
"1 You cannot adjust [FLASH MODE] and [FLASH LVL] if an external flash (optional) is not
connected.
*2 You cannot adjust [FLASH LVL] if the external flash (optional) used is not compatible with the
flash level.
*3 You cannot adjust these settings if the external flash (optional) used is not compatible with the
red-eye reduction.
*4 An electronic shutter is the function used to adjust the shutter speed electronically.
111