The purpose o fsafety s ymbols i stoattract yourattention topossible dangers. Thesafety
s ymbols, and the
explanationswith them, deserve your careful attentionand understanding, T he safety wamings do not by
themselves eliminate any danger, The instructions or warningsthey give are not substitutesfor properacci-
dent preventionmeasures.
SYMBOL
&
&
A
NOTE:
MEANING
SAFETY ALERT SYMBOL:
Indicates warning or caution, May be used in conjunction with other symbols or pictogrsphs.
WARNING: Failure to obey a safety warningcan result in serious injuryto yourself or to others.
Always follow the safety precautionsto reducethe dsk of fire, electric shockand personalinjury.
CAUTION:
Failureto obey a safetywamingmay resultin propertydamage or personal injuryto
yourself or to others. Always followthe safety precautionsto reducethe riskof fire, electricshock
and personalinjury.
Advises you of informationor instructions vital to the operationor maintenance of the equipment.
_.
WARNING: Do not
to
this tool
attempt
operate
untilyou have read thoroughlyand understand
completely all instructions,safety rules, etc.
contained in this manual, Failure to comply can
resultin accidents involvingfin), alectdc shock,
or sedous personal injury.Save owner's manual
and review frequentlyfor continuingsafe
operation,and instructingothers who may use
this tool.
READ ALL INSTRUCTIONS
•
READ THESE INSTRUCTIONS AND INSTRUC-
TIONS FOR YOUR TABLE SAW AND ROUTER
THOROUGHLY BEFORE USING ACCESSORY.
•
KNOW YOUR POWER TOOL. Read the
operator's manualfor your Table Saw carefully.
Learnthe saw'sapplications and limitationsas
well as the specificpotentialhazards related to
this tool.
•
KEEP THE WORK AREA CLEAN, Cluttered
work areas and work benches inviteaccidents.
DO NOT leave tools or pieces of wood on the
sew while it is in operation,
• ALWAYS WEAR SAFETY GLASSES. Everyday
glasses have only impect-rasistantlenses;they
are NOT safety glasses.
•
ALWAYS DISCONNECTSAW FRO• POWER
SUPPLY BEFORE MAKING ADJUSTMENTS
ORADDING ACCESSORIES, Make sun) the
switch is off when reconnectingto power supply,
_k
WARNING:
• ALWAYS FEED WORKPIECE AGAINST THE
ROTATION OF THE cU'rTER.
•
DO NOT USE AWKWARD HAND POSITIONS.
• KEEP FINGERS AWAY from the revolvingcutter,
and use fixtureswhen necessary.
• ALWAYSUSE THE DUST COVER for overhead
guardhg.
•
DO NOT REMOVE JAMMED CUTOFF PIECES
untilcutter or blade has stoppedand tool has
been disconnectedfrom power soume.
•
HOLD THE WORKPIECE FIRMLYAGAINST
THE TABLE,
• ALWAYS USE THE SAW'S MASTER SWITCH
TO TURN THE ROUTER ON AND OFF.
SAVE THESE INSTRUCTIONS. Refer to them
frequentlyand usa to instructother users.If you
loan someonethis accessory,lean them these
instructions also.
_11=WARNING: Usa recommendedacoessodes.
The usa of improperaccessoriesmay create a
risk of injury.Do not use this router mounting kit
for any purposeother than as an accessory to
the recommendedtable saw. Failure to heed
this warning can resultin sadous personal
injuryor damage to the accessory.
_lb WARNING: Before attemptingto use your
router mountingkit, familiadze yourselfwith all
operatingfeatures and safety requirements.
The operation of any router can resultin foreignobjectsbeing thrown intoyour eyes, which
can resultin severeeye damage, Beforebeginningpowertooloperation,alwayswear safety
goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety •ask for use over eyeglasses or standard safety glasses
with side shields, available at Sears Retail Stores. Always wear eye protectionwhich is
marked to complywith ANSI Z87.1
2