Installing Light Bulb; Bevel Scale - Craftsman 113.213213 Owner's Manual

iNSTALLiNG UGHT BULB
1. install a light bulb (not larger than 60 watt) into the
socket insidethe head.
BEVEL SCALE
NOTE: The bevel scale has been included to provide a |
quick method for beveling the table to approximate ZE
.ol
angles. If precise accuracy is necessary, a square, or UNE_
other precision measuring tool should be used to posi-
tion the table.
1. To use the bevel scale do the following.
a. Using an adjustable wrench, turn the nut (on the
table lock pin) clockwise. This will pull the table
lock pin out of its indexing hole in the table sup-
port.
b. Lcosen the table bevel lock by turning it counter-
clockwise using an adjustable wrench.
c. Move table so desired angle on bevel scale is
straight across from zero line on table support,
d. Retighten the table bevel lock,
2. To return the table to the 90° position do the follow-
ing:
a. Loosen the table bevel lock,
b. Move the table and reinstall the table lock pin into
the indexing hole in the table support, Tap in gen-
tly into place.
c. Tighten the table bevel lock,
d. Tighten the nut (on the table lock pin) finger tight
so it won't vibrate loose.
BEVEL SCALE
LOCK
PIN
18
TABLE SUPPORT
TABLE
BEVEL
LOCK
TABLE