Key Parts And Components - Kenmore 402.8903 Series Use & Care Manual

KEY PARTS AND COMPONENTS
There are several important components that are referenced in
this manual.
A. EASY-TO-USE CONTROL PANEL
Rotate the Cycle Selector Knob to select the desired dry
cycle. Add cycle options or adjust settings with the touch of
a button.
A
B. TIME AND STATUS DISPLAY
The easy-to-read LED display shows cycle status and
estimated time remaining.
C.
CYCLE MODIFIERS
Adjust the cycle defaults such as temperature and dryness
level with the touch of a button.
NOTE: Not all settings are available for all cycles.
See page 20.
D. POWDER COATED DRUM
To Clean the powder coated tumbler, use a damp cloth with
a mild, non-abrasive cleaner suitable for powder coated
surfaces.
Remove the cleaner residue and dry with a clean cloth.
E. EASY-ACCESS REVERSIBLE DOOR
Wide-opening, see-through glass door provides easy access
for loading and unloading. Door swing can be reversed to
adjust for installation location.
j/j
G
Power Cord Location
(Gasmodels)
Terminal Block Access
Panel (Electric models)
F. FRONT-MOUNT LINT SCREEN
Front-mounted lint screen allows for easy access and
cleaning between loads.
G. LEVELING FEET
Four leveling feet (two in front, and two in back) adjust to
improve dryer stability on uneven floors.
Gas Connection Location Exhaust Duct Outlet
(Gas models)
Rear of Dryer
KenmoreDi?erOwnersManual-01 EN.indd "_ 2010-06-17 q7 3:33:41