Choosea Good Place For Your Scanner; Install The Scsi Interface Board (Pc Only) - Epson Perfection 600 Quick Start Manual

C
HOOSE
Here are some points to consider:
Place the scanner on a flat, stable surface. If the scanner is tilted, it can't
operate properly.
Make sure to place the scanner where you can easily unplug the power
cord, and where the SCSI cable can reach your computer.
Be sure there's enough room behind the scanner for the cables, and above
the scanner so you can fully raise the document cover, if necessary.
Keep the scanner away from direct sunlight and strong light sources.
Avoid places subject to shocks and vibrations, or high temperatures and
humidity.
I
NSTALL
You must install your SCSI board and SCSI software before installing the
scanner driver and software applications.
If you have a Macintosh or if you already have a SCSI board installed in
your PC, skip this section.
Note:
For additional information, see the Installation Guide that came with your
SCSI board.
1. Turn off the computer and any peripheral devices. Unplug any power
cords; then disconnect all cables from the back panel of your computer.
2. Remove the cover from your computer.
Caution:
Ground yourself before you touch any of the computer's internal components
by touching an unpainted metal surface inside the computer case.
8
A G P F
OOD LACE
T SCSI I
HE NTERFACE
Y S
OR OUR CANNER
B (PC O
OARD
)
NLY