Installing The Scsi Interface Card - Epson ES-1000C Getting Started

Pc color scanner

Hide thumbs Also See for ES-1000C:

Table of Contents

Installing the SCSI Interface Card

Follow the steps below to install the SCSI interface card in your

computer. For additional information, see the manuals for your

interface card and computer.

If you are already using a SCSI adapter in your computer for

other SCSI devices, such as an external hard disk, see Chapter I

of the

scanner in an existing SCSI daisy-chain.

Note:

Your SCSIadqter must be compatible with Adqtec EZ-SCSI

software to use the EPSON Scanning Utilities that control your

scanner.

Turn off the computer and any peripheral devices.

Disconnect the computer's power cable from the electrical

outlet and from the back panel. Also disconnect any other

cables, including the keyboard cable.

Remove the cover from your computer. If you need detailed

instructions, see your computer manual.

Before you touch any of the computer's internal components,

touch an unpainted metal surface inside the computer case

to discharge any static electricity.

Choose an option slot for the interface card. You can install

the card in any available slot.

Remove the retaining screw from the option slot cover and

remove the slot cover. Keep the screw to secure the

interface card to the computer. Store the slot cover in a safe

place in case you remove the interface card later.

Guide

for inform ation on including the

Table of Contents