Ieee 1394 Firewire Scanner Interface Card; Installing The Card In Your Scanner - Epson Expression 1680 User Manual

Epson user manual color graphics scanner expression 1680

Hide thumbs Also See for Expression 1680:

Table of Contents

IEEE 1394 FireWire Scanner Interface Card

To use the IEEE 1394 FireWire scanner interface card (B808342), your system must

have the following:

■

Built-in IEEE 1394 FireWire port or IEEE 1394 FireWire PCI card

(OHCI-compliant)

■

Macintosh: OS 8.6 or later with FireWire Update 2.1 or later

■

Windows: pre-installed version of Windows XP, 2000, or Me

This section explains how to install the IEEE 1394 FireWire scanner interface card in

your scanner, and how to connect the scanner to your computer.

Note: If you have the Professional FireWire model of the Expression 1680, the

card was preinstalled in your scanner.

Before you begin, turn off the scanner and disconnect the power cord and any cables.

Caution: Static electricity can damage electronic components like the IEEE 1394

FireWire scanner interface card. To discharge static electricity, touch the

scanner's metal frame before handling the card.

1. Remove the two screws securing the shield plate to the scanner's optional interface

slot, and then remove the plate. Put the screws and shield plate in a safe place in

case you want to reinstall the shield plate later.

Using Optional Equipment

Table of Contents

G780b