Loading Paper in the Automatic Document Feeder
Your automatic document feeder can load up to 30 sheets of the following
paper sizes: Letter, Legal, Checks (3.3 × 5 inches), A4 (8.27 × 11.7 inches), and B5
(7.17 × 10.1 inches).
Follow these steps to load paper:
1. Slide the automatic document feeder's left
edge guide all the way to the left.
2. Insert your document face up in the
automatic document feeder's tray.
Note: Don't push the paper into the feed
path or the paper may jam.
3. Move the right edge guide so it touches
the right edge of your paper.
4. Scan your document. If you're using EPSON Scan, follow these guidelines:
■
Select either
■
Select
ADF
■
If you want to scan only part of the document page, load the first page only.
Click the
Preview
Preview area, then load your entire document. When you click
scanner scans the area defined by the marquee on each page.
Note: You can still load documents manually, if you want. Just lift the automatic
document feeder and place the first sheet of your document face down on the
document table. If you scan documents individually on the document table, select
Document Table as the Document Source in EPSON Scan. Be sure to close the
automatic document feeder before scanning. If you open it while scanning, you'll
get an error.
or
Office Mode
Professional Mode
as the Document Source.
button. The first page is ejected. Adjust the marquee in the
in the Mode box.
, the
Scan
Using Optional Equipment
31