Receiving A Phone Call - Sharp FO-CC500 Operation Manual

Check the number in the display before pressing
HOLD
press to clear the mistake and then enter the correct digits.
ERASE
Note: If a pause is needed between any of the digits to access an outside
line or a special service, press

Receiving a Phone Call

1
When the cordless handset rings, pick it up and press any key (except
) to answer. Talk to the other party.
OFF
OFF
If the cordless handset is in the charger, simply pick it up to answer (you do
not need to press a key).
2
When you are ready to end the call, press
You can also end the call by simply placing the cordless handset in the
charger.
Putting a Call on Hold
To put the other party on hold during a call, press
will beep while the call is on hold. When you are ready to resume the call,
press once again. Note that placing the cordless handset in the charger
HOLD
will not break the connection while a call is on hold, and thus phone charges
may continue to apply.
You can also dial by entering the phone
number first and then pressing
FUNCTION
/PAUSE
. The pause will appear as a hyphen (-).
Receiving a Phone Call
.
TALK
. If there is a mistake,
TALK
.
OFF
OFF
. The cordless handset
HOLD
39