Table of Contents
Advertisement
Each outgoing message will play (to stop playback, press
It will not be possible to set the reception mode to A.M. if a general
outgoing message has not been recorded.
Note: In A.M. mode, the machine will automatically switch to fax reception if it
detects 6 seconds of silence after answering a call. For this reason, if a caller
pauses for this length of time while leaving a message, they will be cut off.
Number of rings in A.M. mode (Toll Saver function)
The number of rings on which the machine answers incoming calls in A.M.
mode depends on whether the Toll Saver function is turned on, and if it is on,
whether you have messages.
The Toll Saver function is initially turned on.
Toll Saver
No received messages
Received messages
NOTHING
4 Rings
2 Rings
To turn off the Toll Saver
function, see page 67.
Operating the Answering System
Toll Saver
ON
Hello!
(Answer according to
NUMBER OF RINGS setting)
To adjust the
NUMBER OF RINGS
setting, see page 89.
STOP
).
OFF
55
Advertisement
Table of Contents
