Using The "Options" Menu; Checking The Lamp Life Status; Turning On/Off The On-Screen Display - Sharp XV-Z200E Operation Manual

Using the "Options" Menu

Checking the Lamp Life
Status
You can confirm the cumulative lamp usage
time and the remaining lamp life (percentage).
Display the "Options" menu to check
the lamp life status.
➝For operating the menu screen, see
pages 38 to 41.
Remaining lamp life
Lamp usage condition
100%
Operated exclusively
Approx.
in Eco mode ( ) 4,000 hours 200 hours
Operated exclusively
Approx.
3,000 hours 150 hours
in Standard mode ( )
Note
• It is recommended that the lamp be
changed when the remaining lamp life
becomes 5%.
For lamp replacement, contact your near-
est Sharp Authorised Projector Dealer or
Service Centre.
• The table above indicates rough estimates
in the case of using only in each mode
shown. Remaining lamp life changes within
the range of the values shown depending
on the frequency at which "Eco Mode" is
switched to " " (Eco mode) and "
(Standard mode) (see page 53).
Turning on/off the On-
screen Display
This function allows you to turn on or off the
on-screen messages that appear during input
select.
Select "OSD Display" in the "Options"
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Description
Selected Item
(ON) All On-screen Displays are
displayed.
(OFF) INPUT/FREEZE/AUTO SYNC/
"An invalid button has been
pressed." are not displayed.
5%
Approx.
Approx.
"
On-screen Display
On-screen Display
-51