System connections (continued)
Using with the batteries
Use 4 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
Open the battery cover.
Slide the cover in the direction of the arrow.
Insert the batteries according to the direction indicated in
the battery compartment.
Close the cover.
Remove the batteries if the unit is not to be used for long period
of time to prevent battery leakage which may cause potential
When batteries are low, sound may become distorted and unit
may automatically turn off during high volume level. Reduce the
volume level or replace the batteries.
ALKALINE (AA) (1.5V)
Approx. 8 hrs.
48mW + 48mW
Output Subwoofer 80mW
Battery life may vary depending on the temperature, battery
types and usage conditions.
Precautions for battery use:
Installing the batteries incorrectly may cause the unit to
Insert the batteries according to the direction indicated in the
Remove the batteries if the unit will not be used for a long
period of time. This will prevent potential damage due to
When using batteries, the brightness of all illumination light
(indicators) is reduced compared to using AC/DC adaptor.
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
Do not use rechargeable batteries (nickeI-cadmium battery,
Changing power source:
Turn off the unit before changing the power source. If the 6V DC
power supply is directly plugged in during power on, the unit
may automatically enter to stand-by mode. Press the ON/
STAND-BY button again to turn on the unit.