Specifications - Sharp CD-XP160W Operation Manual

Specifications

CD-XP160W
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
T
Power source AC 110/127/220/230 - 240 V, 50/60 Hz
Power 70 W
consumption
Dimensions Width: 270 mm (10-5/8")
Height: 305 mm (12")
Depth: 343 mm (13-1/2")
Weight 6.6 kg (14.5 lbs.)
Amplifier
T
Output power MPO: 100 W (50 W + 50 W) (10 % T.H.D.)
RMS: 66 W (33 W + 33 W) (10 % T.H.D.)
RMS: 55 W (27.5 W + 27.5 W) (0.9 %
T.H.D.)
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Input terminal Microphone: 1 mV/600 ohms
29
CD player
T
Type 3-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency 20 - 20,000 Hz
response
Dynamic range 90 dB (1 kHz)
Tuner
T
Frequency range FM: 88 - 108 MHz
AM: 531 - 1,602 kHz
Cassette deck
T
Frequency 125 - 8,000 Hz (Normal tape)
response
Signal/noise ratio 50 dB (TAPE 1, recording/playback)
50 dB (TAPE 2, playback)
Wow and flutter 0.3 % (WRMS)
Speaker
T
Type Twin-drive speaker system
10 cm (4") woofer x 2
Maximum input 66 W
power
Rated input power 33 W
Impedance 6 ohms
Dimensions Width: 200 mm (7-7/8")
Height: 305 mm (12")
Depth: 175 mm (6-9/16")
Weight 2.6 kg (5.7 lbs.)/each
02/5/27 CD-XP160W(SCA)E3.fm