Remote Control - Sharp CD-XP160W Operation Manual

Remote control

CD-XP160W
Battery installation
T
1 Remove the battery cover.
2 Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3 Replace the cover.
Precautions for battery use:
Replace all old batteries with new ones at the same time.
z
Do not mix old and new batteries.
z
Remove the batteries if the unit is not to be used for long periods
z
of time. This will prevent potential damage due to battery leak-
age.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
z
Installing the batteries incorrectly may cause the unit to malfunc-
z
tion.
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the
z
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
Periodically clean the transmitter on the remote control and the
z
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
z
operation. Change the lighting or the direction of the unit.
Keep the remote control away from moisture, heat, shock, and
z
vibrations.
11
Test of the remote control
T
Check the remote control after checking all the connections (see
pages 7 - 9).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
Remote sensor
02/5/27 CD-XP160W(SCA)E2..fm
0.2 m - 6 m
(8" - 20')