Sharp CD-XP160W Operation Manual page 9

Aerial connection
T
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and posi-
tion the FM aerial wire in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause noise
pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling > < Attaching to the wall >
Wall
External FM aerial:
Use an external FM aerial if you require better reception. Consult your
dealer.
External
FM aerial
75 ohm
coaxial
cable
Note:
When an external FM aerial is used, disconnect the supplied FM aerial
wire.
Speaker connection
T
Connect the black wire to the minus (-) terminal and the red to the
plus (+) terminal.
Right speaker
Caution:
Use speakers with an impedance of 6 ohms or
z
more, as lower impedance speakers can damage
Screws (not supplied)
the unit.
Do not mistake the right and the left channels. The
z
right speaker is the one on the right side when you
face the unit.
Do not let the bare speaker wires touch each
z
other.
Do not allow any objects to fall into or to be placed
z
in the bass reflex ducts.
Do not stand or sit on the speakers. You may be in-
z
jured.
Notes:
The speaker grilles are not removable.
z
There is no physical distinction between the right and left speak-
z
ers.
02/5/27
Left speaker
Incorrect
CD-XP160W(SCA)E1.fm
CD-XP160W
8