Recording To A Cassette Tape - Sharp CD-XP160W Operation Manual

Recording to a cassette tape

Before recording:
When recording important selections, make a preliminary test to
z
ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising
z
from malfunction of this unit.
The volume and sound controls can be adjusted with no effect on
z
the recorded signal (Variable Sound Monitor).
For recording, use only normal tapes. Do not use metal or
z
CrO tapes.
Recording can be operated in the TAPE 1 compartment. The
z
TAPE 2 is for playback only.
Erase-prevention tab of cassette tapes:
When recording on a cassette tape,
z
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
To protect the recorded sound, remove
z
the tab after recording. Cover the tab
hole with adhesive tape to record on the
tape without the tab.
Recording from a CD (CDs)
T
You can record 3 CDs continuously.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 1 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the CD button and load the desired disc.
Side A 4
Press one of the
to select the disc to be recorded first.
5
Tab for Tab for Press the
side B side A
1, which also engages the
button.
CD playback and tape recording will start.
To stop recording:
Press the button of TAPE 1.
To perform programmed recording:
1 Press the CD button.
2 Programme discs and tracks (see page 17).
3 Press the
02/5/27
1 - 3 buttons on the remote control
button of TAPE
button of TAPE 1, which also engages the
CD-XP160W(SCA)E3.fm
CD-XP160W
button.
22