Listening To A Cassette Tape - Sharp CD-XP160W Operation Manual

Listening to the radio (continued)
CD-XP160W
Memorising a station
T
This may be operated only with the remote control.
You can store 30 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1 Perform steps 1 - 3 in "Tuning" on page 18.
2 Press the MEMORY button to
enter the preset tuning sav-
ing mode.
3 Within 5 seconds, press the PRESET (
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 5 seconds, press the
MEMORY button to store that
station in memory.
If the preset number indicators go out before the station is
memorised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or if the AC power lead dis-
connected.
To recall a memorised station
T
Press the PRESET ( or
tion.
19
or ) button to
) button to select the desired sta-

Listening to a cassette tape

Before playback:
For playback, use normal or low-noise tapes for
z
the best sound. (Metal or CrO tapes are not rec-
ommended.)
Do not use C-120 tapes or poor-quality tapes, as
z
they may cause malfunctions.
Before loading a tape into the cassette compart-
z
ment, tighten the slack with a pen or a pencil.
02/5/27 CD-XP160W(SCA)E2..fm