Table of Contents
Advertisement
PROBLEMS AND SOLUTIONS
Make sure that you are using the recommended
Copies are distorted.
~
fax paper. See "Loading the Fax Paper" in
Chapter 1.
I
Make sure that the fax paper is properly loaded
in your machine.
I
The printing head may be dirty. See "Fax
printing head" in Chapter 8,
If reception or copying has been done
Reception/copying is
I
continuously for a long time, the printing head
interrupted.
may have become overheated. Turn off the
power and let it cool down.
I
The fax may interrupt during a voice call if
Voice calls are interrupted
Option Setting 8 is set to YES and the reception
by the fax.
mode is set to AUTO. See "Making Telephone
I
Calls" in Chapter 3.
No reception occurs when
~
Make sure you have not run out of fax paper,
polling is attempted.
(FO-355 only)
, .
Make sure the transmitting machine is in
automatic reception mode.
I
If the transmitting machine has polling security,
make sure that your fax number has been
entered both in your fax and in the transmitting
machine.
~ . Theoperationofthis equipment onthesame
Bell Tinkle
line as the telephone or other equipment with
(New Zealand)
audible warning devices or automatic ring
detectors will give rise to bell tinkle or noise and
may cause problem occur
TROUBLESHOOTING
9-3
Advertisement
Table of Contents
