Table of Contents
Advertisement
SENDING DOCUMENTS
Rapid Key Dialling
If the number you want to dial has been stored as a Rapid Key number (see
"Storing Numbers for Automatic Dialling" in Chapter 2), you can dial it by pressing
the appropriate Rapid Key.
Example: To dial Speed
Dial number "02", press
Rapid Key 02.
Press the appropriate Rapid Key.
The name of the receiving party will ap-
pear in the display. If no name was
stored, the fax number will appear. (If
the name or number is incorrect, press
the STOP key.)
The document will be automatically
transmitted once the connection is
made,
Speed Dialling
If the number you want to dial has been stored as a Speed Dial number, you can
dial it by pressing the SPEED Dl~key
and then entering the 2-digit number (see
"Storing Numbers for Automatic Dialling" in Chapter 2).
1
Press the SPEED DIAL key and then
SPEEII
OIAL
~am
enter the two digits of the Speed Dial
%~~
number by pressing the number keys.
To enter numbers 1 through 9, first en-
>
>
~?
~
ter Oand then the number.
2
Check the display. If the name or num-
ber shown is correct. press the START
key. (If not, press the STOP key and
then repeat Step 1.)
BASIC OPERATIONS
3-7
Advertisement
Table of Contents
