Table of Contents
Advertisement
SEITING THE DATEANDTIME
The date and time appear in the display and reports, and are printed at the top of
every page you transmit. Set the date and time by pressing the keys on the
operation panel as shown below.
+ To correct a mistake, press the SPEED DIAL key to move the cursor back to
the mistake, and then enter the correct number.
1
Press the keys shown at left. "ENTRY
'"ooN
m
MODE" will appear in the display,
2
mm
Press the keys shown at left. "DATE &
TIME SET" will appear in the display.
3
START
o
0
Press the START key
4 ~~
Enter a 2-digit number for the day ("01"
to "31").
(Example: the 5th)
5
Enter a 2-digit number for the month
@@
("01" for January, "02" for February, "12"
(Example: January)
for December, etc.).
G
~
~
(Example: 1996)
Enter the last 2 digits of the year.
7
@@@@
Enter a 2-digit number for the hour ("00"
to "23") and a 2-digit number for the min-
(Example: 9:25)
ute "00" to "59").
Press the START key and then the
8aG
STOP key.
INITIAL SE~lNGS
2-5
Advertisement
Table of Contents
