Table of Contents
Advertisement
LOADING THE FAX PAPER
4~
F0166: Close the cover and then press
@
4 /
,,,
",
,/
.
'-"-4
m
the START kev. A short length of the fax
,,/<T:
' 'y
v:
. .,:>j '"'
,Z.aa-,
=.-3:2+';
,,y
-*.:,.
,//
L
+'
paper will feed'out. Grasp the paper by
the edge and pull upward to tear it off.
FM:
Close the cover. A short length
of the fax paper will feed out and be cut
off. (If this doesn't happen, repeat the
loading procedure.)
Note: The FO-355 has a built-in anti-curl mechanism that will help to reduce paper
curling problems. The anti-curt mechanism will be more effective at the be-
ginning of the paper roll and less effective toward the end.
To assure a long life for your fax and obtain the best reproduction quality we
recommend that you use the following Sharp fax (thermal) paper which is available
from your dealer:
FWPR6
THERMAL PAPER (60 m roll)
+ The use of any other paper may result in poor copy quality and excessive
build-up of residue on the head. This is due to the different thermal reactive
characteristics of each manufacturer's paper.
When the paper runs out, OUT OF PAPER will appear in the display. Reception and
copying will no longer be possible. To replace the paper, first take out the old roll,
then load the new roll as described above.
Do not unpack the paper until you are ready to use it. It may become discolored if:
+ It is stored at high humidity or high temperature.
+ It is exposed to direct sunlight.
+ It comes in mntact with glue, thinner, or a freshly copied blueprint.
+ It is scratched, causing heat due to friction.
14
INSTALLATION
Advertisement
Table of Contents
