Table of Contents
Advertisement
OPTIONAL SEUINGS
Setting 3:4 RINGS MANUAL ANSWER
Press "l" (YES) to have the machine answer a call after 4 rings when it is in
MANUAL reception mode. Press "2" (NO) to turn the function off
Factory setting: "2"
Setting 4: TEUFAX REMOTE NUMBER (TRANSFER CODE)
This sets the l-digit number for activating fax reception from an extension
telephone. Enter any number from "O" to "9".
. Factory setting: "S"
Setting 5: REMOTE RECEPTION SELECT
This turns detection of the code for activating fax reception from an extension
phone on or off. Press "l" to turn detection on, or "2" to turn detection off.
. Factory setting: "1"
Setting 6: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out Transaction Reports. Enter a number from
"l"
to "4" as follows:
"l" (ALWAYS PRINT):
Print out after each transmission, reception, or error
"2" (ERR/TMR PRINT): Print out only after an error occurs (or after a timer
operation on the FO-355).
"3" (SEND ONLY):
Print out only after a transmission
"4" (NEVER PRINT):
Never print out
Factory setting: "2"
Setting 7: DIAL MODE
This sets the mode of dialling. Press "l" if you are on a tone dial line, or "2" if you
are on a pulse dial line.
For all units installed in New Zealand, select "l" for tone dialling, The pulse dial
setting ("2") will not operate correctly and must not be used.
. Factory setting: "1"
Setting 8: AUTO FAX/PHONE CHANGEOVER
Press "l" (YES) to have your fax detect whether incoming calls are voice calls or
fax transmissions in automatic reception mode. Press "2" (NO) to turn the function
off.
. Facto~ setting: "2"
6-2
OPTIONAL SETTINGS
Advertisement
Table of Contents
