Table of Contents
Advertisement
STORING NUMBERS FOR AUTOMATIC DIALING
1
"N~ON
m @
Press the keys shown at left. "FAX/TEL.
# MODE" will appear in the display.
2
m
Press "2" to select CLEAR.
3
am
Enter the Speed Dial number that you
want to clear by pressing the number
(Example)
keys.
4
START
o
Press the START key
o
5
STOP
Return to Step 3 to clear another num-
Step 3 or
o @
ber, or press STOP to exit.
To make changes in a number previously stored, repeat the storing procedure.
Select the code number for which you want to make changes in Step 3, and then
change the number andior name when they appear in the display (Steps 4 and 6.
respectively).
Numbers and letters are changed as described in "Entering letters for names" in
this chapter.
+ A lithium battery keeps automatic dialling numbers in memory
Your fax uses a lithium battery to keep automatic dialling numbers and other
programmed data in memory when the power is turned off
Batte~ power is consumed primarily when the power is turned off. With the power
kept continuously off, the life of the battery is about 5 years.
If the battery fails, have your dealer or service agent replace it. Do not try to replace
it yourself.
2-12
INITIAL SETTINGS
Advertisement
Table of Contents
