Transmitting Metadata - Sharp AR-M256 Operation Manual

TRANSMITTING METADATA

Follow the steps below to select a metadata set, enter each item, and perform metadata transmission.
1
Touch the [DATA ENTRY] key.
ADDRESS
ADDRES
DATA ENTRY SEND S
If no metadata sets have been stored, the
Note
[DATA ENTRY] key cannot be selected.
Store a metadata set in the Web pages and
then perform the transmission procedure.
2
Touch the key of the metadata that
you wish to use.
CANCEL
OK
METADATA 2
METADATA 4
METADATA 6
METADATA 8
3
Touch the [OK] key.
CANCEL
OK
1/2
ADATA 2
ADATA 4
ADATA 6
ADATA 8
4
The keys of the items stored in the
metadata set will appear. Touch the
key of the item that you wish to enter.
READY TO SEND
.
(DATA ENTRY MODE)
METADATA SET
DATA ENTRY
User ID
Pass Code
Bill Code
If you selected the wrong metadata set,
Note
touch the [METADATA SET] key and return
to the screen of step 3. Metadata items
entered to that point will not longer be
effective.
1/2
5
Touch the key of the value that you
wish to enter.
CANCEL
OK
3 6
DIRECT ENTRY
Value2 1/9
Value4
Value6
• If the entry values of the metadata item were stored
in selection format, the selections will appear as
keys. If a value is editable, the [DIRECT ENTRY] key
can be touched to manually enter a value.
• If a metadata item requires the entry of text, a text
entry screen will appear. Enter the required
information.
• To change the number of items that
Note
appear at once, touch the display item
number select key. Each time the key is
touched, the number of items displayed
switches between 3 and 6.
6
Touch the [OK] key.
CANCEL
OK
3 6
DIRECT ENTRY
Value2 1/9
Value4
Value6
7
Enter all items.
READY TO SEND
.
(METADATA SEND MODE)
METADATA SET
DATA ENTRY
User ID Value2
Pass Code xxxxxx
Bill Code xxxxxx
4
39