Editing And Deleting Programmed Transmission Destinations - Sharp AR-M256 Operation Manual

BEFORE USING THE NETWORK SCANNER FUNCTION

Editing and deleting programmed transmission destinations

To edit or delete programmed destinations, click "Destination" in the menu frame of the Web page.
1
Click "Destination" in the menu frame
of the Web page.
2
In the Destinations List, click the
checkbox of the destination that you
want to edit or delete.
3
To edit the selected destination, click
"Edit" under the Destinations List.
When finished, be sure to click "Submit" to save
your changes.
4
To delete the selected destination,
click "Delete" under the Destinations
List.
If you attempt to edit or delete a programmed destination in the following situations, a warning message will
Note
appear and editing/deletion will not be possible.
• The destination that you wish to edit or delete is currently being used for transmission.
• The destination is included in a group.
If the destination is being used for a current transmission, cancel the transmission or wait until it is completed and
then edit or delete the destination. If the destination is included in a group, delete the destination from the group
and then edit or delete the destination.
14
The programming screen
of the destination
selected in step 2
appears. Edit the
information in the same
way as you initially stored
it.
A message appears
asking you to confirm the
deletion. Click "Yes" to
delete.