Sharp AR-M256 Operation Manual page 42

METADATA DELIVERY
8
Touch the [OK] key.
ATA SET CANCEL
OK
1/4
9
Select image settings and any other
settings, and perform the scan send
procedure.
READY TO SEND
.
AUTO
QUALITY
200dpi
RESOLUTION
PDF-NONE
FILE FORMAT
A3
ORIGINAL
• The procedures for selecting settings and performing
transmission are the same as for scan send.
• To change an entered value, touch the [DATA ENTRY] key
again. The entry screen for the selected metadata set will
appear.
• When metadata send settings are configured, the [DATA ENTRY] key is highlighted. If you do not wish to send
Note
metadata, cancel the metadata settings and then perform the transmission
• When a destination or metadata setting has been selected in data entry mode, it will not be possible to switch
to another mode.
40
ADDRESS
BOOK
ADDRESS REVIEW
ADDRESS ENTRY
DATA ENTRY SEND SETTINGS