Black Screen Function; On-Screen Display Override Function - Sharp Notevision XG-C40XE Operation Manual

Black Screen Function

Projector
2, 3, 4
Projected Image
(GUI) On-screen Display

On-screen Display Override Function

Projector
2, 3, 4
(GUI) On-screen Display
39
Remote control
BLACK
SCREEN
button
1, 5
sg
Remote control
1, 5
This function can be used to superimpose a black
screen over the projected image.
Blacking out the Projected Image
Press BLACK SCREEN. The screen turns black and
"BLACK SCREEN" is displayed on the screen. To return
to the original projected image, press BLACK SCREEN
again.
• To use the remote control to operate this
function, slide the MOUSE/ADJUSTMENT switch to the
MOUSE position before pressing BLACK SCREEN.
Turning off the On-screen Display
The On-screen Display ("BLACK SCREEN") that
appears during black screen can be turned off. When
"BLK SCRN Disp" is set to " " in the GUI menu, "BLACK
SCREEN" will not be displayed during function.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß /© to select "Options".
3 Press ∂/ƒ to select "BLK SCRN Disp".
4 Press ß/© to select " " to turn on or " " to turn
off the On-screen Display.
5 To exit from the GUI, press MENU.
This function allows you to turn off the on-screen
messages that appear during input select. Once "OSD
Display" is set to " " in the GUI menu, the on-screen
messages will not appear when INPUT is pressed.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options".
3 Press ∂/ƒ to select "OSD Display".
4 Press ß/© to select " " to turn on or " " to turn
off the On-screen Display.
5 To exit from the GUI, press MENU.
MOUSE ADJ.
MOUSE ADJ.
MOUSE ADJ.