Saving And Selecting Adjustment Settings - Sharp Notevision XG-C40XE Operation Manual

Computer Image Adjustments (INPUT 1 or 2 mode Only)
Projector
1, 6
2, 3, 4
5
(GUI) On-screen Display
2
3
4
Remote control

Saving and Selecting Adjustment Settings

This projector allows you to store up to seven adjustment
settings for use with various computers. Once these
settings are stored, they can be easily selected each
time you connect a computer to the projector.
Saving the adjustment setting
Selecting a saved setting
• If a memory position has not been set, a resolution and
• When selecting the stored adjustment setting with "Select
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select "Save Setting", and then press
©.
4 Press ∂/ƒ to select the desired memory location of
the setting.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select "Select Setting", and then press
©.
4 Press ∂/ƒ to select the desired memory setting.
5 Press ENTER to select the setting.
6 To exit from the GUI, press MENU.
frequency setting will not be displayed.
Setting", the computer system should match the stored
setting.
MOUSE ADJ.
MOUSE ADJ.
32