Black Screen Function; On-Screen Display Override Function - Sharp XG-NV5XB Operation Manual

Black Screen Function

Projector
BLACK
SCREEN
button
1, 5
2, 3, 4
Projected Image
sg
(GUI) On-screen Display

On-screen Display Override Function

Projector
1, 5
2, 3, 4
(GUI) On-screen Display
This function can be used to superimpose a black
screen over the projected image.
VOL
ON
MUTE
Blacking out the Projected Image
OFF
Press BLACK SCREEN. "BLACK SCREEN" is dis-
BLACK
SCREEN LASER
played on the screen. To return to the original projected
TOOLS MENU
image, press BLACK SCREEN again.
• To use the "Power" remote control to operate this function,
R-CLICK ENTER
slide the MOUSE/ADJUSTMENT switch to the MOUSE
position before pressing BLACK SCREEN.
INPUT IrCOM
FREEZE AUTO SYNC
Turning off the On-screen Display
The On-screen Display ("BLACK SCREEN") that
appears during black screen can be turned off. When
"BLK SCRN Disp" is set to " " in the projector's GUI
menu, "BLACK SCREEN" will not be displayed during
function.
(For use with the "Power" remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß /© to select "Options".
3 Press ∂/ƒ to select "BLK SCRN Disp".
4 Press ß/© to select " " to turn on or " " to
5 To exit from the GUI, press MENU.
This function allows you to turn off the on-screen
messages that appear during "input select" and the
VOL
ON
"IrCOM" function. Once "OSD Display" is set to " " in
MUTE
the projector's GUI menu, the on-screen messages will
OFF
not appear when INPUT and IrCOM on the projector or
BLACK
SCREEN LASER
TOOLS MENU
the "Power" remote control are pressed.
(For use with the "Power" remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
R-CLICK ENTER
1 Press MENU.
INPUT IrCOM
2 Press ß/© to select "Options".
FREEZE AUTO SYNC
3 Press ∂/ƒ to select "OSD Display".
4 Press ß/© to select " " to turn on or " " to turn
5 To exit from the GUI, press MENU.
turn off the function.
off the On-screen Display.
MOUSE ADJ.
MOUSE ADJ.
MOUSE ADJ.
E-30