Adjusting The Colour Temperature; Selecting The Signal Type - Sharp Notevision XG-C40XE Operation Manual

Picture Adjustments
Projector
(GUI) On-screen Display
Projector
2, 3, 4
(GUI) On-screen Display
29
Remote control
1, 4
2, 3
Remote control
1, 6
5

Adjusting the Colour Temperature

This function can be used to adjust the colour
temperature to suit the type of image input to the
projector (video, computer image, TV broadcast, etc.).
Decrease the colour temperature to create warmer,
reddish images for natural flesh tones. Increase the
colour temperature to create cooler, bluish images for
a brighter picture.
Description of Colour Temperature
3
(Red) ß button
Decreases colour temperature
for warmer, reddish,
incandescent-like images.
(Low colour temperature)
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU. Menu bar and "Picture" menu
screen appear. GUI operation guide is also
displayed.
2 Press ∂/ƒ to select "CLR Temp".
3 Press ß/© to move the
adjustment item to the desired setting.
4 To exit from the GUI, press MENU.

Selecting the Signal Type

This function allows you to select the input signal type
(COMPUTER/RGB or COMPONENT) for INPUT 1 or 2
port.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Picture".
3 Press ∂/ƒ to select "Signal Type", and then
press ©.
4 Press ∂/ƒ to select "Computer/RGB" or
"Component".
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
3
© button (Blue)
Increases colour temperature for
cooler, bluish, florescent-like
images.
(High colour temperature)
MOUSE ADJ.
mark of the selected
MOUSE ADJ.