Auto Sync Adjustment; Auto Sync Display Function - Sharp Notevision XG-C40XE Operation Manual

Computer Image Adjustments (INPUT 1 or 2 mode Only)
Projector
1, 5
2, 3, 4
AUTO SYNC
button
(GUI) On-screen Display
On-screen Display
g
s
(GUI) On-screen Display
Remote control Auto Sync
• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by
When "Auto Sync" is set to "ON":
• The
• The Auto Sync adjustment setting previously made is
• Automatic adjustments can be made by pressing AUTO
• When the optimum image cannot be achieved with Auto
During Auto Sync adjustment, the On-screen Display
changes as shown on the left.
• Auto Sync adjustment may take some time to complete,
f

Auto Sync Display Function

Normally, an image is not superimposed during Auto
Sync adjustment. You can, however, choose to
superimpose a background image during Auto Sync
adjustment.
Adjustment
pressing AUTO SYNC, or automatically by setting
"Auto Sync" to "ON" in the projector's GUI menu.
sync adjustment is automatically made each time
the projector is turned on while connected to a com-
puter or the input selection is changed.
cleared when the projector's setting is changed.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select "Auto Sync".
4 Press ß/© to select "ON".
5 To exit from the GUI, press MENU.
SYNC.
Sync adjustment, use manual adjustments. (See page 31.)
depending on the image of the computer connected to the
projector.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß /© to select "Fine Sync".
3 Press ∂/ƒ to select "Auto Sync Disp".
4 Press ß/© to select "
background image or "
background image during Auto Sync adjustment.
5 To exit from the GUI, press MENU.
MOUSE ADJ.
MOUSE ADJ.
" to superimpose a
" to remove the
34