Sharp Notevision XG-C40XE Operation Manual page 25

Setting up the Screen
Projector
1, 4a
3
2
4b
On-screen Display
(Example:
4:3 NORMAL image)
2 2 Test Pattern 2
2 2
Digital Keystone Correction
Pressing ∂ ∂ ∂ ∂ ∂
in Step 2
Digital Shift
or
Press ∂.
Remote control
On-screen Display
(Example:
16:9 WIDE image)
Pressing ƒ ƒ ƒ ƒ ƒ
in Step 2
Press ƒ.
Digital Image Adjustments
Digital Keystone Correction
When the image is distorted due to the projection angle,
the Digital Keystone Correction function allows you to
correct it.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1
Press KEYSTONE to select mode. Each time
KEYSTONE is pressed, the screen changes as
shown on the left.
2
Press ENTER to display test pattern.
3
Press to make adjustments.
∂/ƒ/ß/©
4
a. Press KEYSTONE until normal screen
appears.
b. To reset the KEYSTONE setting, press UNDO.
Digital Shift
When a WIDE or NORMAL (WIDE) image is projected,
this function can be used to shift the image up or down.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1
Press KEYSTONE to select "DIGITAL SHIFT" as
shown on the near left.
2
Press ENTER to display test pattern.
3
Press to make adjustments.
∂/ƒ/ß/©
4
a. Press KEYSTONE until normal screen
appears.
b. To reset the DIGITAL SHIFT setting, press
UNDO.
• This function only works with WIDE and NORMAL (WIDE)
picture display modes during video or DTV input. (See page
38 for details.) The DIGITAL SHIFT screen is not displayed
when projecting images other than WIDE or NORMAL
(WIDE).
MOUSE ADJ.
MOUSE ADJ.
22