Sharp Notevision XG-C40XE Operation Manual page 18

Connecting the Projector
To a DTV decoder or DVD player
Connecting an amplifier and other audio components
Audio cable (commercially available)
15
1 Connect one end of the 3RCA to 15 pin D-sub cable to the
2 Connect the other end to the corresponding terminals on the
3 To use the built-in audio system, connect one end of the audio
3RCA to 15 pin D-sub cable (sold separately)
2 To video input terminals
Audio cable (commercially available)
To audio output terminals
• Always turn off the projector while connecting to audio
• By using external audio components, the volume can be
• The AUDIO OUTPUT terminal allows you to output audio to audio
To audio input terminals
INPUT 1 or 2 port on the projector.
video source.
cable (commercially available) to AUDIO INPUT terminal for
INPUT 1, 2 on the projector.
Connect the other end to the Audio output terminal on the
video source.
Select "Computer/RGB" or "Component" for "Signal Type" on
the GUI menu, depending on the video source.
CAUTION
components, in order to protect both the projector and the
components being connected.
amplified for better sound.
components from the selected AUDIO INPUT terminal for INPUT
1, 2 or AUDIO INPUT terminals for INPUT 3, 4 connected to
audiovisual equipment.
DTV decoder
or
DVD player
Amplifier