Hide thumbs Also See for XG-C40XU:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
Im lnteresse der Benutzersicherheit (erforderliche Sicherheitsregeln in einigen Ländern) muß das Gerät in seinen
Originalzustand gebracht werden. Außerdem dürfen für die spezifizierten Bauteile nur identische Teile verwendet
werden.
Based on the existing models XG-C40XU/XE, these models have their LCD panels redesigned.
This Service Manual covers only the modifications that are different from the base models. For the
unchanged service information, refer also to the Service Manual (S01B4XG-C40XU) for the base
models (XG-C40XU/XE).
Die LCD-Bildschirme dieser Modelle wurden gemäß den vorhandenen Modellen XG-C40XU/XE
neu konstruiert. Diese Service-Anleitung beinhaltet die Veränderungen, welche sich von den
Grundmodellen unterscheiden.
Beziehen Sie sich für die unveränderten Service-Informationen der Grundmodelle (XG-C40XU/
XE) auf die Service-Anleitung (S01B4XG-C40XU).
CONTENTS
» LIST OF CHANGED PARTS ....................................... 2
» ELECTRICAL ADJUSTMENT .................................... 4
» BLOCK DIAGRAM .................................................... 16
» OVERALL WIRING DIAGRAM ................................. 18
» SCHEMATIC DIAGRAM: OUTPUT UNIT ................. 20
» PARTS LIST .............................................................. 30
SERVICE MANUAL
SERVICE-ANLEITUNG
MODELS
MODELLE
OUTLINE
BESCHREIBUNG
Page
» LISTE VON VERÄNDERTEN TEILEN ........................ 9
» ELEKTRISCHE EINSTELLUNG ............................... 11
» BLOCKSCHALTBILD ................................................ 16
» GESAMTSCHALTPLAN ........................................... 18
» SCHEMATISCHER SCHALTPLAN
» ERSATZTEILLISTE .................................................. 30

SHARP CORPORATION

1
LCD PROJECTOR
LCD PROJEKTOR
XG-C40XU
XG-C40X E
INHALT
AUSGABEEINHEIT .................................................. 20
XG-C40XU
1
(
)
XG-C40XE
(
1
)
S22F7XGC40XU1
(
)
1
(
)
1
Seite

Advertisement

Table of Contents
loading

Summary of Contents for Sharp XG-C40XU

  • Page 1: Table Of Contents

    OUTLINE Based on the existing models XG-C40XU/XE, these models have their LCD panels redesigned. This Service Manual covers only the modifications that are different from the base models. For the unchanged service information, refer also to the Service Manual (S01B4XG-C40XU) for the base models (XG-C40XU/XE).
  • Page 2: List Of Changed Parts

    Resistor 0 1/16W M-Ox. VRS-CY1JF000J — XG-C40XU ( 1 ) XG-C40XE ( 1 ) OUTPUT UNIT Refer to Parts List CABINET AND MECHANICAL PARTS XG-C40XU ( 1 ) XG-C40XE ( 1 ) Bottom Cabinet Ass DBDYU1140CEK1 DBDYU1140CEK2 XG-C40XU1 ’ Bottom Cabinet Ass...
  • Page 3 XG-C40XU XG-C40XE Ref.No. Description Current Note XG-C40XU ( 1 ) XG-C40XE ( 1 ) OPTICS MECHANISM PARTS 6-37 LCD Module Unit Red RLCDP0141CEZZ RLCDPA004WJZZ 6-38 LCD Module Unit Green RLCDP0142CEZZ RLCDPA005WJZZ 6-39 LCD Module Unit Blue RLCDP0143CEZZ RLCDPA006WJZZ 6-47 Screw M2.6-8, x12...
  • Page 4: Electrical Adjustment

    XG-C40XU XG-C40XE ELECTRICAL ADJUSTMENT Hook up a signal generator, or a DOSV or Mac personal computer to the projector in order to feed the signals specified in the Adjusting conditions. Adjusting point Adjusting conditions Adjusting procedure » Make the following settings: EEPROM 1.
  • Page 5 XG-C40XU XG-C40XE Adjusting point Adjusting conditions Adjusting procedure » Adjust the PSIG waveform as shown below. P SIGNAL 1. Connect the oscilloscope to TP1102 for red. (With XGA signal input) TP1202 for green. TP1302 for blue. 2. Make the following choice: Adjust the PSIG-L setting.
  • Page 6 XG-C40XU XG-C40XE Adjusting point Adjusting conditions Adjusting procedure » Using the control switches or the remote controller Horizontal 1. Feed the NTSC monoscope center pattern signal. buttons, adjust the data to have the same overscan 2. Group : VIDEO 2 in Reft and Right.
  • Page 7 XG-C40XU XG-C40XE Adjusting point Adjusting conditions Adjusting procedure » Using the control switches or the remote controller PAL colour 1. Feed the PAL colour bar sig- saturation level nal. buttons, adjust the difference between the 100% white portion and the red portion to 0.2 ±0.05 Vp-p.
  • Page 8 XG-C40XU XG-C40XE Adjusting point Adjusting conditions Adjusting procedure » In the process mode and select L1. Check the col- Colour system 1. Receive the colour bar sig- performance nal. our and tint. check » In the process mode and select L2. Check the pic- Video system 1.
  • Page 9: Liste Von Veränderten Teilen

    Resistor 0 1/16W M-Ox. VRS-CY1JF000J — XG-C40XU ( 1 ) XG-C40XE ( 1 ) OUTPUT UNIT Beziehen Sie sich auf die Teilliste CABINET AND MECHANICAL PARTS XG-C40XU ( 1 ) XG-C40XE ( 1 ) Bottom Cabinet Ass DBDYU1140CEK1 DBDYU1140CEK2 XG-C40XU1 ’...
  • Page 10 XG-C40XU XG-C40XE Ref.Nr. Beschreibung Bestehend Bemerkung XG-C40XU ( 1 ) XG-C40XE ( 1 ) OPTICS MECHANISM PARTS 6-37 LCD Module Unit Red RLCDP0141CEZZ RLCDPA004WJZZ 6-38 LCD Module Unit Green RLCDP0142CEZZ RLCDPA005WJZZ 6-39 LCD Module Unit Blue RLCDP0143CEZZ RLCDPA006WJZZ 6-47 Screw M2.6-8, x12...
  • Page 11: Elektrische Einstellung

    XG-C40XU XG-C40XE ELEKTRISCHE EINSTELLUNG Einen Signalgenerator, PC oder Macintosh-Computer am Projektor anschließen, um die in den Einstellbedingungen spezifizierten Signale zuzuführen. Einstellposition Einstellbedingung Einstellverfahren » Folgende Einstellungen vornehmen: EEPROM- 1. Den Netzschalter einschalten und das Gerät SW5101 drücken, um den Verarbeitungsmodus Initialisierung für ca.
  • Page 12 XG-C40XU XG-C40XE Einstellposition Einstellbedingung Einstellverfahren » Die P-SIG-Wellenform auf die nachstehende Form P-SIGNAL 1. Das Oszilloskop einstellen. anschließen an TP1102 für Rot. (Mit XGA-Signaleingang) TP1202 für Grün. TP1302 für Blau. 2. Die folgende Wahl treffen. Die PSIG-L-Einstellung vornehmen. Gruppe : OUTPUT 2 3.7V 0.1V...
  • Page 13 XG-C40XU XG-C40XE Einstellposition Einstellbedingung Einstellverfahren » Die Daten einstellen, um den gleichen Überscan- Horizotalregelung 1. Das NTSC- Monoskopsignal zuführen. Wert rechts und links zu erzielen. Hierfür die 2. Gruppe : VIDEO 2 Regelschalter oder die Tasten auf der Gegenstand : N358-DLY (4) Fernbedienung betätigen.
  • Page 14 XG-C40XU XG-C40XE Einstellposition Einstellbedingung Einstellverfahren » Die Differenz (100%) des Weiß- und Rotanteils auf 1. Das Trennfarbbalkensignal NTSC- 0,00 ±0,05 Vs-s einstellen. Hierfür die zuführen. Farbsättigungspegel Gruppe : VIDEO 1 Regelschalter oder die Tasten auf der Gegenstand : N-COLOR Fernbedienung betätigen.
  • Page 15 XG-C40XU XG-C40XE Einstellposition Einstellbedingung Einstellverfahren » Sich vergewissern, daß die Einstellungen wie folgt 1. Gruppe: VIDEO1 Setup Gegenstand: SET UP B vorgenommen wurden: 11 für SET UP B, und 2 für SET UP C SET UP C. » Sich vergewissern, daß am Bildschirm keine 1.
  • Page 16: Block Diagram

    BLOCK DIAGRAM / BLOCKSCHALTBILD 16~17...
  • Page 17: Overall Wiring Diagram

    OVERALL WIRING DIAGRAM / GESAMTSCHALTPLAN 18~19...
  • Page 18 OUTPUT UNIT-1/5 / AUSGABEEINHEIT-1/5 20~21...
  • Page 19 OUTPUT UNIT-2/5 / AUSGABEEINHEIT-2/5 22~23...
  • Page 20 OUTPUT UNIT-3/5 / AUSGABEEINHEIT-3/5 24~25...
  • Page 21 OUTPUT UNIT-4/5 / AUSGABEEINHEIT-4/5 26~27...
  • Page 22 OUTPUT UNIT-5/5 / AUSGABEEINHEIT-5/5 28~29...
  • Page 23: Parts List

    R1011 VRS-CY1JF000J 1/16W Metal Oxide R1013 VRS-CY1JF000J 1/16W Metal Oxide R1814 VRS-CY1JF000J 1/16W Metal Oxide PRINTED WIRING BOARD ASSEMBLIES (NOT REPLACEMENT ITEM) XG-C40XU ( 1 ) DUNTKB116DE04 – Signal Unit — DUNTKB117DE04 – PC Terminal Unit — DUNTKA693FE04 – S-Out/Regulater Unit —...
  • Page 24 XG-C40XU XG-C40XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB181FE01/02 Q1311 VS2SC2411KR-1 J 2SC2411KR Q1312 VS2SA1036KR-1 J 2SA1036KR OUTPUT UNIT Q1313 VS2SA1036KR-1 J 2SA1036KR Q1401 VS2SC2735//-1 J 2SC2735 INTEGRATED CIRCUITS Q1402 VS2SC2735//-1 J 2SC2735 Q1403 VS2SC2735//-1...
  • Page 25 XG-C40XU XG-C40XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB181FE01/02 C1220 VCKYCY1EF104Z J 0.1 Ceramic C1223 RC-KZ0416CEZZ J 10 Ceramic OUTPUT UNIT (Continued) C1225 VCKYCY1EF104Z J 0.1 Ceramic C1226 VCKYCY1EF104Z J 0.1 Ceramic D5017 VHDHRW0702A-1...
  • Page 26 XG-C40XU XG-C40XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB181FE01/02 C5177 VCKYCY1CF104Z J 0.1 Ceramic C5178 VCCCCY1HH220J J 22p Ceramic OUTPUT UNIT (Continued) C5179 VCCCCY1HH220J J 22p Ceramic C5507 VCKYCY1CF104Z J 0.1 Ceramic C1469 VCFYEC1CM334J J 0.33...
  • Page 27 XG-C40XU XG-C40XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB181FE01/02 R1274 VRS-CY1JF3R3J J 3.3 1/16W Metal Oxide R1275 VRS-CY1JF3R3J J 3.3 1/16W Metal Oxide OUTPUT UNIT (Continued) R1280 VRS-CY1JF100J J 10 1/16W Metal Oxide R1284 VRS-CY1JF100J...
  • Page 28 XG-C40XU XG-C40XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB181FE01/02 R1515 VRS-TX2HF100J J 10 1/2W Metal Oxide R1517 VRS-CY1JF000J 1/16W Metal Oxide OUTPUT UNIT (Continued) R1518 VRS-CY1JF272J J 2.7k 1/16W Metal Oxide R1522 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide R1413 VRS-CY1JF332J J 3.3k 1/16W Metal Oxide...
  • Page 29 XG-C40XU XG-C40XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB181FE01/02 R5082 VRS-CY1JF101J J 100 1/16W Metal Oxide R5084 VRS-CY1JF103J J 10k 1/16W Metal Oxide OUTPUT UNIT (Continued) R5093 VRS-CY1JF101J J 100 1/16W Metal Oxide R5099 VRS-CY1JF471J...
  • Page 30 XG-C40XU XG-C40XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB181FE01/02 R5595 VRS-CY1JF103J J 10k 1/16W Metal Oxide R5596 VRS-CY1JF103J J 10k 1/16W Metal Oxide OUTPUT UNIT (Continued) R5598 VRS-TX2HF2R2J J 2.2 1/2W Metal Oxide R5599 VRS-CY1JF103J...
  • Page 31: Cabinet And Mechanical Parts

    XG-C40XU XG-C40XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKB181FE01/02 OUTPUT UNIT (Continued) P5511 QPLGN0175FJZZ J Plug 3-Pin SC1101 QSOCN3271TAZZ J Socket 32-Pin(R) SC1201 QSOCN3271TAZZ J Socket 32-Pin(G) SC1301 QSOCN3271TAZZ J Socket 32-Pin(B) SC1404 QCNCW6054TAZZ...
  • Page 32 XG-C40XU XG-C40XE OPTICS MECHANISM PARTS/ Ref. No. Part No. Description Code Ref. No. Part No. Description Code TEILE FÜR OPTIKMECHANISMUS...
  • Page 33 Code Ref. No. Part No. Description Code COPYRIGHT © 2002 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Xg-c40xe

Table of Contents