Saving And Selecting Adjustment Settings - Sharp NoteVision XG-NV6XA Operation Manual

Computer Image Adjustments
Projector
2, 3, 4
(GUI) On-screen Display
2
3
4
31
Remote control
1, 6
5

Saving and Selecting Adjustment Settings

This projector allows you to store up to seven adjustment
settings for use with various computers. Once these
settings are stored, they can be easily selected each
time you connect the computer to the projector.
Saving the adjustment setting
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select "Save Setting", and then press
©.
4 Press ∂/ƒ to select the desired memory location of
the setting.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
Selecting a saved setting
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select "Select Setting", and then press
©.
4 Press ∂/ƒ to select the desired memory setting.
5 Press ENTER to select the setting.
6 To exit from the GUI, press MENU.
• If the memory position has not been set, the resolution and
frequency will not be displayed.
• When selecting the stored adjustment setting with "Select
Setting", the computer system should match the stored
setting.
MOUSE ADJ.
MOUSE ADJ.