Display Rear Cover - Toshiba Tecra A8 Maintenance Manual

4.27 Display rear cover

4.27 Display rear cover

Removing the Display rear cover
To remove the display rear cover, follow the steps below and refer to Figure 4-42.
1. Remove the following screws.
•
M2.5×6C
•
M2.5×4B
2. Pass the wireless LAN antenna cables and Bluetooth antenna cable through the
hole of the cover assembly and separate the display rear cover and cover assembly.
M2.5×4B FLAT HEAD
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Tapping screw
FLAT HEAD screw
Figure 4-42 Removing the display rear cover
4 Replacement Procedures
×2
×4
Cover assembly
M2.5×6C Tapping
M2.5×4B FLAT HEAD
M2.5×6C Tapping
Display rear cover
[CONFIDENTIAL] 4-63