3.20 ONLY ONE TEST
Subtest 07
Acceleration sensor
This subtest detects and corrects the each axis (X, Y, Z).
NOTE: Make sure that this subtest is executed on the following condition:
1. Flat desk with vertical plane to get the stability of machine.
2. The vertical wall or plane is necessary.
3. Prevent the machine from shake or shock.
<Example>
Set the machine
against the vertical plane
with the Front upward
Flat desk
The figure below shows the name and position of each side.
Left side
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Top
(heaven surface)
Back
3 Tests and Diagnostics
Vertical plane
Right side
Front
[CONFIDENTIAL]
3-45