Toshiba Tecra A8 Maintenance Manual page 272

4 Replacement Procedures
Installing the Wireless LAN card
To install the wireless LAN card, follow the steps below and refer to Figure 4-14.
1. Insert slantingly the wireless LAN card into the connector CN2600 on the system
board.
CAUTION: Insert the slits of the wireless LAN card according to the guide of the slot.
2. Gently push the wireless LAN card down and secure it with the following screw.
•
M2×3C
3. Seat the wireless LAN card cover in place and secure it with the following screw.
•
M2×4B
4. Connect the wireless LAN antenna cables (black and white) to the connectors on the
wireless LAN card.
4-26 [CONFIDENTIAL]
BIND screw
BIND or Security torx screw
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
4.9 Wireless LAN card
×1
×1