4.19 Fan
4.19 Fan
Removing the Fan
To remove the fan, follow the steps below and refer to Figure 4-28.
1. Remove the glass tape and disconnect the fan cable from the connector CN8771 on
the system board.
2. Remove the following screws and fan from the slot.
•
M2.5×6C
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Tapping screw
Fan
Figure 4-28 Removing the fan
4 Replacement Procedures
×2
M2.5×6C Tapping
Glass tape
Fan cable
CN8771
[CONFIDENTIAL]
4-45