4.28 Wireless LAN antenna/Bluetooth antenna
4.28 Wireless LAN antenna/Bluetooth antenna
Removing the Wireless LAN antenna/Bluetooth antenna
To remove the wireless LAN antenna/Bluetooth antenna, follow the steps below and refer to
Figure 4-43.
1. Peel off the insulators and acetate tapes securing the wireless LAN antenna cables
and Bluetooth antenna cable.
2. Remove the wireless LAN antennas and Bluetooth antenna from the slot of the
display rear cover.
Insulator
Figure 4-43 Removing the wireless LAN antenna/Bluetooth antenna
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Wireless LAN antenna
Insulator
Acetate tape
Acetate tape
4 Replacement Procedures
Bluetooth antenna
Insulator
Acetate tape
Acetate tape
Insulator
Acetate tape
[CONFIDENTIAL]
4-65